Eleaf Tance Max Kit Features:
- Dimensions: 31mm – 101mm – 20.5mm
- Weight: 87.5g
- Battery: 1100 mAh
- Max Power: 15 W
- Range: 0.3-3.0 Ohm
Tans Max Kit Set:
- 1 * Set
- 2 * Evaporator
- 1 * USB cable
- Instruction manual
Device Overview:
Eleaf Tance Max is one of many cartridge-based systems that have recently flooded the market for its simplicity and compact size.
- There are six color options to choose from, among which are plain classic colors: black and white.
- If the evaporation time exceeds 15 seconds of continuous operation, the device stops and the LED flashes twice.
- If a short circuit occurs, the Tance Max will flash five times before you try to puff, and if a short circuit occurs during steaming, the LED will flash three times to warn.
- When the voltage drops below 3.3V, the device will flash 20 times and turn off. Time to recharge.
- The battery case is made of zinc alloy, which is good news. The sides and base have a nice beveled chrome effect.
- Tance Max has a rather generous internal battery with a capacity of 1100 mAh, which can be charged through the charging port located at the bottom. This charge has advantages compared to previous older types. Charging time is drastically reduced. A depleted battery usually fully charges within an hour or so. During the charging period, the device will display a red LED on the fair button.
- A fully charged Tance Max is highlighted during use in the following ways. 100% -60% green, 59% -20% blue, 19% or lower red. Continuous flashing red. Recharge time.
- Five clicks on the fire button will turn on the device. Five more clicks turn off the device. Pretty standard thing.
- The cartridge is made of a hardened translucent plastic mold that allows you to see the current level of your fluid.
- There is also a marking to indicate its capacity of 4 ml along with this important hole for filling all rotating seals.
- Tance Max is equipped with a rotating sealing cap on the base of the capsule for easy filling. Turn in the direction of the arrow to open the filling hole. Carefully fill the capsule with liquid through the filling hole. Return the swivel seal to the closed position.
- The module is connected by three magnetic contacts installed inside the battery. Just insert it at the top and get reliable contact.
